HONDA CLICK110

About quality and texture - The tool case from Honda is made using a thin flexible thermoplastic with a cool HM (Honda Motorcycles) embossed in the flap, the quality from the overall fit and finish is perfect.About the feeling of use - I needed to piece together all the parts for the original tool kit for the used Grom I purchased, as this was missing from the under seat storage. Products to buy together - Key products to purchase when piecing together a replacement tool kit would be the screw driver, spanners, spark plug wrench and allen key. Difficulty of installation - The installation of the tool case is a simple task that took 0.1 of an hour to complete. Common sense is what is required to secure the tool case to the rear fender using the tool band. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the tool case is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the tool case, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating. About the feeling of use, Two 16mm flanged bolts are needed for the new engine that I am building from newly purchased parts from Honda. They has done their job securing the oil separator plate onto the right crankcase half. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the flanged bolts is the oil separator plate. Difficulty of installation, I can say the fitment of the flanged bolt for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual which is to be tightened to the required torque value. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda flanged bolt that will be suitable for engine builds and repairs and I do not see this being offered any elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is copper.About the feeling of use, One copper sealing washer was needed for the new engine that I am building from newly purchased part from Honda. It has done its job in sealing between the crankcase and the flange bolt for the tensioner oiler port.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the copper sealing washer is the 6x18mm flange bolt as they all work together on the installation.Difficulty of installation, I can say the fitment of the copper sealing washer for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda copper sealing washer that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum.About the feeling of use, One drain plug washer was needed for the new engine that I am building from newly purchased part from Honda. It has done its job in sealing between the crankcase and the drain plug bolt.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the drain plug washer is the 12mm drain plug bolt as they all work together on the installation.Difficulty of installation, I can say the fitment of the drain plug washer for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda drain plug washer that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum.About the feeling of use, Just one oil bolt washer was needed for the new engine that I am building from newly purchased part from Honda. It has done it's job in sealing between the cylinder and the engine oil temperature sensor.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the oil bolt washer is the sensor guard as they all work together on the installation.Difficulty of installation, I can say the fitment of the oil bolt washer for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda oil bolt washer that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is chrome steel.About the feeling of use, Just on of the radial ball bearings needed for the new engine that I am building from newly purchased parts from Honda. It has done its job supporting the transmissions countershaft within the right crankcase half.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the ones to purchase together to allow for the assembly of the transmission are the other three radial ball bearings.Difficulty of installation, I can say the fitment of the radial ball bearing for my installation was average due to already having access as the crankcase half is new and the process is explained in the service manual which requires the radial ball bearing to be pressed into the crankcase using specific tooling so not to damage the bearing.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda radial ball bearing that will be suitable for engine builds and repairs.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating. About the feeling of use, Two 14mm flanged bolts are needed for the new engine that I am building from newly purchased parts from Honda. They has done their job securing the bearing holder plates into the right crankcase half. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the ones to purchase together to complete the installation of the flanged bolts are the radial ball bearing and bearing holder plates. Difficulty of installation, I can say the fitment of the flanged bolt for my installation was very easy due to already having access as the crankcase half is new and process is explained in the service manual which is to be tightened to the required torque value. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda flanged bolt that will be suitable for engine builds and repairs and I do not see this being offered any elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

This is using for break shaft dust seal in cd125T benly. Good quality material .manufacture by Honda. Made in Japan. RecommendedView Detail

About quality and texture: I am happy with the quality of the drain plug washer from Honda, the washer is made from aluminium and has an outer diameter of 20mm, inner diameter of 12mm and a thichness of 1.5mm. About the feeling of use: The drain plug was showing signs of oil leaking and after the replacement of the washer and tightening it to the correct torque value there are now zero oil leaks. Products to buy together: A magnetic drain plug would also be desirable to purchase alongside the drain plug washer to assist in keeping fine metal particals from circulating in the engine oil. Difficulty of installation: The process to install takes about 5 minutes, give the mating surface a clean, fit the washer under the head of the drain plug and tighten down to 24N . m. Not difficult to do. Cost performance and comparison with other products: Great costing as you are getting a genuine Honda part made from a quality material at the best price when compared to what other brands are charging. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These washers are a consumable item and you need to have spares on hand when carrying out your own maintenance as they tend to leak after being re-used a few times. View Detail

About quality and texture: I am happy with the quality of the 6.5mm sealing washer from Honda, the washer is made from copper and for the M6 sized bolt that are used for blocking the oiler port for the tensioner push rod.About the feeling of use: The original sealing washer had been reused a few times and now had a significant leak, the replacement sealing washer is a perfect fit into the port on the left crankcase cover.Products to buy together: The 14mm sealing washer fort the tensioner push rod bolt would also be desirable to purchase along side the 6.5mm sealing washer to ensure zero oil leaks after performing maintenance on the cam chain tensioner system.Difficulty of installation: The process to install takes about 5 minutes, add 4cc of oil to the tensioner push rod oiler port before installing the sealing washer and torquing down the bolt. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a genuine Honda part made from a quality material at a great price.About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs.View Detail