HONDA MSX125 (GROM) Engine Parts

The Motorcycle Clutch has a Wire style. When Hydraulic. There is a
GROM is Wire style. The Clutch is opened and closed by pushing and pulling the wire, and the Clutch system is simple and ligh...

It is a gentle product for Engine as it removes iron powder from Engine oil.
However, when replacing the oil, check the tightening torque and tighten it.
Be careful not to overtighten it.

I don't think it's as effective as it could be to experience that much.
I think it is better to have it than not to have it, because I do power up a little. It's about
I think it's a good i...

Molto sodisfatto del prodotto, spedizione veloce senza intoppi. Il kit e già stato montato e va veramente bene complimenti... Very satisfied with the product, fast shipping smoothly. The kit h...

Reason for purchase
The shape is the same as the OEM parts and I felt it was simple in appearance.

First of all, I thought I had to make the air entrance large.

I thought it was ...

As I wrote in the title, I was really licking it before I installed it. Even if you wear such a cheap parts, it will not be Large. The tail cowl must be removed in order to remove the cowl of the...

It has been installed on my SUPER CUB110 and has been in use for over a year.

Installation is very easy to replace with NORMAL, and the Instruction Manual is very solid.
One thing I not...

Although I did not do Power up, when I changed Clutch to oil pressure, because the centrifugal oil filter attached to Crankshaft was removed and the load was eliminated, absurd Vibration occurred...

SP Takekawa's Arm is very thin (like Knife's back part) and puts a lot of strain on the PushBolt's head, so it's inevitable to replace it after a few years or tens of thousands of miles. It's a p...

It's been a while since I've written a report on Grom. In fact, during this time, our Grom has undergone a Large scale change and has been transformed into a completely different vehicle. A true ...

KITACO:Throttle kit is a necessity if you want to install NEOBore Up Kit. The kit also includes a bracket for oil cooler installation. KITACO:Big Throttle Kit is available in two versions, one fo...

While replacing the lightweight oil filter
Because it is cheaper than the ones of Mukawa, I bought it without thinking anything, but because I divert the OEM Parts, I installed it is a bit of ...

I forced myself to install it on a MONKEY125 Exhaust System Up Type The result is not immediately apparent, so I have to rate it as 3 Installation is very easy if you follow the instruction manua...

Sense and self-satisfied dress-up parts, with parts that have nothing to do with driving performance Maybe I should have gone with the Black one? Maybe after a few years the colors will degenerat...

msx125인데 순정 제품이 워낙 약하게 얇게 만들어져서 튜닝하려고 구매했습니다 다른 회사 제품도 있지만 키타코 제품이 더 좋아보이고 튼튼해 보여서 키타코 제품으로 골랐습니다 직접 교체할수가 없어서 아직 장착은 안했는데 물건만 봐도 순정보다는 튼튼해 보이네요 Genuine product is very weak though it i...

I changed it to 1.6 times of OEM because of the installation of SStageBore Up Kit The fuel control is controlled by FIcon 2 I don't have the A/F ratio meter now, so I don't know the actual A/F ra...

I recon the Kitaco Cross Gear Set is the best and easiest way to improve the GROMs 4 speed transmission. Using a 1:1 4th gear in the GROM requires a change of final drive sprockets to complement ...

Installation and quality
Because it was purchased with Couplet-onKit, Wiring has been using the Coupler as per the instruction manual Once connected, it was fine (Don't worry, if you make a mi...

Motorcycle beginners wear on Grom.
It was not particularly Trouble, but the illustration of the Instruction Manual and the picture are mono black, so it was hard to understand. Also, because t...

Va muy fina con escape, airbox modificado con filtro de gran rendimiento...a partir de 5000rpm tira la moto hasta las 11.000rpm aunque normalmente solo llego hasta 9000/9500rpm...sin duda es una ...

The difference between the OEM Flywheel and the EnduranceLightweight Fly Wheel is the cutting process of the StarterClutch attachment part to reduce the weight! ! In order to replace the flywheel...

Until now, I've been using the OPMID product, which is almost a "standard" in the GROM world
It was functional enough, but I couldn't stand the poor visibility during the day and decided to re...

The products of major CustomManufacturers such as SP Takekawa and KITACO and Compare and contrast the exclusive design of the car models to see if you like the installation location and design Th...

I installed it in SUPER CUBJA10 while looking at the Instruction Manual Wiring was done I almost made a mistake because the power supply is always Red, the ON position is Black and Earth is Green...

I put it on to counteract the emulsification of the late MODEL
I have also put on the OHLINS Rear shock, but the Shock's Reserver The tank was set up to be attached to the same place as this o...

The ENDURANCE (GROM) Oil Cooler Mounting Kit for 4V Head add indicates this mount is product specific. I could not get this product to fit my Endurance type 4v cylinder head satisfactorily. If yo...

Hola llego muy rápido, ya está instalado, pensaba que se iba a notar más, hay una diferencia de peso con respecto al original de 152 gramos. Pero no está mal por el precio que tiene. Vendedor...

Purchase from User's comment. It is unknown whether it is the measure against emulsification. Every day, because of about 35 to 36 km running, oil temperature rise as it is. In the winter, I ...

It is unknown whether it works effectively as an emulsification countermeasure. Because I use it for commuting to 35 kilometers over and over, the engine oil will rise so much. However, since it ...

Replacement is OEM Product, Oil catch tank with Exclusive Bracket.

In addition to Tank Body, Instruction Manual Blacket - Rubber board Hose - Clip - Tube - Tube clip - Tie wrap is attached...