(0)
89 Reviews View type:
Fits:- KAWASAKI Z400 78-79 B1
- B2 Rear Capacity:1 caliper
- KAWASAKI Z400 LTD 83 T1 Rear Capacity:1 caliper per minute Belt Drive
- KAWASAKI Z250 LTD 83-87 P1
- P2
- ...and more.
Purchased to replace the rear drum on my ELIMINATOR 250. Just a normal pair of shoes.I assembled it without any chamfering because it was too much trouble, but it didn't make any noise.Braking power i...Read More- Fits:
- SUZUKI Intruder Classic800 01-02 [Used in]Front
- SUZUKI GLADIUS650400 10-12 ABS[Where used]Front right side
- SUZUKI DESPELADO800X 97-99 [Used in]Front
- SUZUKI VANVAN200 02-13 [Used in]Front
- KAWASAKI VULCAN1500 CLASSICTourerFi 00-01 [Used in]Rear
- ...and more.
I can stop at the stop line at the intersection.I applied a normal Brake and never crossed the stop line!I was worried about the Red Pad, but considering my weight and Tandem timeThis one was recommen...Read More - Fits:
- SUZUKI BOULEVARDM109R (M1800R INTRUDER/VZr1800) 06-11 VZR1800 [Point of use] rear [Adaptability] ○
- SUZUKI DESPELADO800 (MARAUDER800/VZ800) 97-98 [Point of use/number of disks] Front/single disc [Adaptability] ○
- SUZUKI DESPELADO /X (96 - 97) [Point of use/number of disks] Front/single disc [Adaptability] ○
- SUZUKI BOULEVARD C90 (INTRUDER LC
- INTRUDER C1500
- ...and more.
Personally, I have no complaints. The Mega alloyX seems to have a momentary lapse in the initial braking at the time of breaking, but the purpose of the device is the Rear. So there was no problem the...Read More - Fits:
- KAWASAKI ZZR250 EX250H [Genuine part number] 43082-1116 [Model name] EX250H7F
- KAWASAKI ZZ-R250 EX250H [Genuine part number] 43082-1116 [Model name] EX250-H1/EX250-H2/EX250-H3/EX250-H4
- KAWASAKI ZZ-R250 EX250H [Genuine part number] 43082-1116 [Model name] EX250-H13/EX250-H15
- KAWASAKI ZZ-R250 EX250H [Genuine part number] 43082-1116 [Model name] EX250-H5/EX250-H6/EX250-H7/EX250-H8/EX250-H9/EX250-H10
- SUZUKI GN125E NF41A [Genuine part number] 59300-33812 [Model name] GN125E/GN125EJ
- ...and more.
I use it in my commuter vehicle and it doesn't seem to reduce at all.I've been using it every day with my commute for about a year after the exchange, but when I checked the thickness of the Pad the o...Read More - Fits:
- SUZUKI WOLF50 (89 - 99) 【Used place / Number of disks] front / Single disk [Goodness of fit] ○
- SUZUKI RG 500 [gamma] (83 - 99) 【Used place / Number of disks] front / Single disk [Goodness of fit] ○
- SUZUKI NZ250/S (86) 【Used place / Number of disks] front / Single disk [Goodness of fit] ◎
- SUZUKI RG125E (82) 【Used place / Number of disks] front / Single disk [Goodness of fit] ○
- SUZUKI GSX400E KATANA (83 - 85) 【Used place / Number of disks] front / Single disk [Goodness of fit] ◎
- ...and more.
ESTRELLARS is unreliable with one push 1 POT, but since I switched to this RK's MAX, I haven't had a single anxious moment.I used to use RK's FA5, but sometimes I had a hard braking sensation (i.e. no...Read More - Fits:
- SUZUKI WOLF50 (89 - 99) 【Used place / Number of disks] front / Single disk [Goodness of fit] ○
- SUZUKI RG 500 [gamma] (83 - 99) 【Used place / Number of disks] front / Single disk [Goodness of fit] ○
- SUZUKI NZ250/S (86) 【Used place / Number of disks] front / Single disk [Goodness of fit] ◎
- SUZUKI RG125E (82) 【Used place / Number of disks] front / Single disk [Goodness of fit] ○
- SUZUKI GSX400E KATANA (83 - 85) 【Used place / Number of disks] front / Single disk [Goodness of fit] ◎
- ...and more.
I was using BALIUS?s with about 100,000 km of replacement.But I bought the second generation BALIUS2 after getting a 3 year blank, so I bought it as stock. The photo shows both for Front and for Rear....Read More - Fits:
- SUZUKI DL650 DL1000 V-STROM (04 - 11) 【Used place / Number of disks] front / Double disc [Goodness of fit] ◎
- KAWASAKI VULCAN 400 1700 Nomad (12 - 16) 【Used place / Number of disks] front / Double disc [Goodness of fit] ◎
- KAWASAKI VULCAN 400 1700 Vakuero ABS (13 - 16) 【Usage place】 rear [Goodness of fit] ◎
- KAWASAKI VULCAN 400 900 Classic (06 - 14) 【Usage place】 rear [Goodness of fit] ◎
- KAWASAKI VULCAN 400 Tourer (98 - 99) 【Used place / Number of disks] front / Double disc [Goodness of fit] ◎
- ...and more.
It was used in BALIUS?As soon as you replace it, you'll notice the gold color☆ that you can see from Caliper. It's not too much, but you'll be happy to see it shiningly. (Lol) 。As far as the all-impor...Read More - Fits:
- SUZUKI VanVan200 08 (Bangbang) [Frame No.] NH42A - 100410 or later [Point of use] Front:1 set used
- SUZUKI VanVan200 13 (Bangbang) [Frame No.] NH42A - 101982 or later [Point of use] Front:1 set used
- SUZUKI VanVan200Z 06 (Bangbang) [Frame No.] NH41A-107866 or later [Point of use] Front:1 set used
- SUZUKI XF650 99 (Free Wind) [Point of use] Front:1 set used
- SUZUKI VanVan200 05 (Bangbang) [Frame No.] NH 41 A - 106594 or later [Point of use] Front:1 set used
- ...and more.
Every time I ride a motorcycle, I replace it with the Golden PadEspecially since the W800 was a very unsettling stopping power this time aroundI couldn't resist until the NORMALPad was reduced and rep...Read More - Fits:
- YAMAHA RENAISSA 96-97 SRV250
- YAMAHA MAJESTY250 (SG20J) 4D9 [Point of use] Right side
- YAMAHA MAJESTY250 (SG03J) 5SJ [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5SJ C type [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5GM [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- ...and more.
Installed on GB250Installation is not very difficult and takes about 30 minutesLever is Quantity:Pair (for Left and Right) The OEM was ported because it was changed inI shaved a little bit with Grinde...Read More - I used it on a '95 ESTRELLA 250 For now, the installation is fine I haven't run it yet, but I'm glad it's cheap anyway 。Read More
- Fits:
- YAMAHA RENAISSA 96-97 SRV250
- YAMAHA MAJESTY250 (SG20J) 4D9 [Point of use] Right side
- YAMAHA MAJESTY250 (SG03J) 5SJ [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5SJ C type [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5GM [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- ...and more.
Nissin brake master cylinder arrived in Australia in excellent condition and works beautifully on my VFR750.
It Is very well made and looks great on my bike. Lever adjustment is very easy and effe...Read More - Fits:
- YAMAHA RENAISSA 96-97 SRV250
- YAMAHA MAJESTY250 (SG20J) 4D9 [Point of use] Right side
- YAMAHA MAJESTY250 (SG03J) 5SJ [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5SJ C type [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5GM [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- ...and more.
The OEM Brake master fee ring doesn't feel right (Did the air bite some?) I also thought about Radial, but it's not a good idea I was worried that it would do something bad to the ABS & there is no cl...Read More - Fits:
- SUZUKI DESPELADO800 97-99 [Used in]Front
- SUZUKI DESPELADO800X 97-99 [Used in]Front
- SUZUKI VANVAN200 02-13 [Used in]Front
- SUZUKI SV400S 98-99 [Used in]Front
- SUZUKI SV650 16-18 [Used point]Front right side
- ...and more.
가급적이면 이 패드 좌 우 따로있는거 명심하시고 구매하세요
아님 저처럼 일 두번합니다 문제는 한짝을 두개 사는바람에 다른 한짝도 또 샀다는거
일단 써봐야 알겠지만, 세심하게 잘 포장해서 빠르게 보내주시는 점 위바이크재팬에 감사드립니다
Please keep this pad on the left and right side as much as p...Read More - Fits:
- SUZUKI Intruder Classic800 01-02 [Used in]Front
- SUZUKI GLADIUS650400 10-12 ABS[Where used]Front right side
- SUZUKI DESPELADO800X 97-99 [Used in]Front
- SUZUKI VANVAN200 02-13 [Used in]Front
- KAWASAKI VULCAN1500 CLASSICTourerFi 00-01 [Used in]Rear
- ...and more.
I replaced it to try it out, as the OEM didn't work wellI can feel it amazingly and it works betterI would definitely use it again next timeRead More - Fits:
- SUZUKI Intruder Classic800 01-02 [Used in]Front
- SUZUKI GLADIUS650400 10-12 ABS[Where used]Front right side
- SUZUKI DESPELADO800X 97-99 [Used in]Front
- SUZUKI VANVAN200 02-13 [Used in]Front
- KAWASAKI VULCAN1500 CLASSICTourerFi 00-01 [Used in]Rear
- ...and more.
I installed it on my Intruder Classic 400 ButFirst of all, I thought I would start with the Pad and changed it There was a change and an effect that I could feelI think it's a very, very effective pro...Read More - [Short Lever] Brake Master Cylinder Kit [Horizontal Type 1/2-inches/Tank Separate Body Type]By NISSINFits:
- HONDA CBR1000F 89-92
- HONDA CB250RS 80-82
- HONDA CBR250R (MC17/19) 88-89
- HONDA CBR1100XX SUPERBLACKBIRD 99-02
- HONDA CBR1100XX SUPERBLACKBIRD 97-98
- ...and more.
brembo, with the replacement of Radial Mount 100mmMaster Cylinder was also changed from OEMi'm happy with the tighter fee ringRead More - Fits:
- KAWASAKI ZZR250 90-94 EX250H3 FNO. EX250H-000001- [Point of use] rear
- KAWASAKI ZZR250 90-94 EX250H4 FNO. EX250H-000001- [Point of use] rear
- KAWASAKI ZZR250 90-94 EX250H5 FNO. EX250H-000001- [Point of use] rear
- KAWASAKI ZZR250 95-99 EX250H10 FNO. EX250H-054001- [Point of use] rear
- KAWASAKI ZZR250 95-99 EX250H6 FNO. EX250H-054001- [Point of use] rear
- ...and more.
Installed on a '95 Kawasaki EX-4Replacement from the OEM PadI don't know the OEM Manufacturer, but the lesser used Rear brake and Even so, the Fee Ring will change when you exchange itI replaced the H...Read More - Fits:
- YAMAHA RENAISSA 96-97 SRV250
- YAMAHA MAJESTY250 (SG20J) 4D9 [Point of use] Right side
- YAMAHA MAJESTY250 (SG03J) 5SJ [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5SJ C type [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5GM [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- ...and more.
This is an in-play for the CBR400RR/NC29Nisshin's SemiRadial master at the time of delivery, probably due to age-related deterioration It's a matter of taste, but I've replaced the cylinder with the S...Read More - Fits:
- YAMAHA RENAISSA 96-97 SRV250
- YAMAHA MAJESTY250 (SG20J) 4D9 [Point of use] Right side
- YAMAHA MAJESTY250 (SG03J) 5SJ [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5SJ C type [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- YAMAHA MAJESTY250 (SG03J) 5GM [Point of use] Left side * ABS vehicles are not possible and may not work properly.
- ...and more.
I put a 14mm Mesh hose in my SRX400 I don't know if it's because Lever is so far away and AxelControl is hard to do, and it's not very subtle I can't control it, so I'm going to put this 1/2-inches on...Read More - Fits:
- HONDA 400X 13
- HONDA CB250RS 80-82
- HONDA CBR400R 13
- YAMAHA RENAISSA 96-97 SRV250
- YAMAHA MAJESTY250 (SG20J) 4D9 [Point of use] Right side
- ...and more.
The SRV250's OEM Brakes inevitably have a bad Touch, and the Brake Pads and Replacing the brake hose didn't improve the situation much, and cleaning the Caliper Pistons didn't help much either It was ...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING