■One long aluminum product such as handlebar, fork outer tube, etc.
■Inner dimensions of the box: Approx. 20 x 10 x 70cm
*Not available for overseas orders
[Notes on the anodizing service "KOHKEN ALMA BOX for 1 long"
KOHKEN ALMA BOX for 1 long is available only if you agree to the following terms and conditions.If you do not agree to the terms of this agreement, you will not be able to use this service.Be sure to read the following notes carefully before purchasing.
■Notes on ordering
・Parts to be placed in "KOHKEN ALMA BOX for 1 long" must be ordered in one product, same color.It is not possible to order by color.In such a case, the difference in price will be charged separately by cash on delivery.
・Only aluminum products can be placed in the "KOHKEN ALMA BOX for 1 long".Anodized aluminum can only be applied to aluminum products.Please do not add other metals (iron, stainless steel, titanium, copper, etc.).
■Notes on shipping
Please do not pack the boxes in such a way that the boxes are significantly bulged or the contents come out of the boxes.Please make sure to pack the parts in such a way that they are not damaged or dented.We are not responsible for scratches or dents caused by transportation.
・Please fill in the number of parts on the attached application form.If you do not fill in the form, please note that Kohken cannot accept any claim for loss of parts.
・When shipping parts, please be sure to use the shipping slip included in the package. Please note that we will not be able to accept the work if you use any other invoice.
■Notes on delivery time
・The delivery time is usually about one week after arrival at KOHKEN.The delivery date will be extended if any of the required information is omitted.
・If there are any parts that cannot be anodized as they are during the inspection after arrival, KOHKEN will contact the customer for confirmation.In such cases, the delivery date will be extended due to work stoppage.
■Precautions for anodizing
・Some parts are painted instead of being anodized.In this case, sandblasting is used as a stripping process.The cost of sand blasting will be charged separately by cash on delivery.We are not responsible for any anodized aluminum defects caused by paint residue if you peel off the paint by yourself.
・Please clean the parts beforehand as sending it back to KOHKEN DENKA.Due to the process of anodizing, KOKEN will clean the product, but it may not be possible to completely remove the oil and grease adhering to the thread locking agent and the screw holes that are not penetrated.If those foreign substances become masking effects or drip somewhere in the treatment process, it may cause anodic defects (unevenness in dyeing, flaking, etc.).We are not responsible for such cases.
・The anodizing process has the property that it depends on the material very much.Cast products (including die-cast products which are often used for motorcycle stock parts) are prone to uneven color or uneven dyeing because the composition of the material is not constant, and the material itself may not be dyed with discoloration.Due to the difference of materials, not all the parts you request will have the same finish.This is an unavoidable phenomenon due to the characteristics of anodizing, so please be aware of this before ordering.Some products may not be visible from the outside, and we cannot accept any claims even if you are not satisfied with the finished product.
・It is not recommended to peel off the anodized aluminum by yourself when re-anodizing.Re-anodizing is available at a price including anodizing removal.Anodized aluminum peeling is another process that can greatly affect the finished product.If you do the exfoliation work by yourself, it may cause problems such as "rough surface of aluminum" or "strange surface color".We are not responsible for such cases.
・The finish of re-anodizing depends on the material of aluminum.It also reflects the current status of the parts.The laser etched parts will disappear by re-anodizing (the character mark will remain).
・When reanodizing, the cylinders with press-fit parts will become loose.The clearance of the press-fit part of the bearing and the part where the pin is stuck will be wider than before processing.This is an unavoidable phenomenon due to the characteristics of anodizing, so please be aware of this before ordering.We are not able to answer your questions about how to solve the problem.
・If there are scratches or corrosion on the parts you currently use, they will be anodized as they are, so the scratches, corrosion marks and dents will not disappear.Re-anodizing does not guarantee that the part will look like new.
・Products consisting of multiple parts (parts joined by press fitting, etc.) may be stained only in the part where electricity is flowing due to the nature of anodizing.In addition, there is a case that sagging occurs from the joint part of each part, and it becomes the cause of the anodized aluminum defect (unevenness of dyeing, flaking, etc.).
・Parts with components other than aluminum (stainless steel, iron pins, bearings, etc.) cannot be processed as they are because they will be dissolved during anodizing.Please note that you will be asked to remove it or return it untreated.We do not accept any claims for resin collars left on wheel nuts, etc., even if they are treated as they are.
・If requesting a pipe with both ends blocked, please specify the position of the hole to be drilled.Due to the characteristics of the anodizing process, a hole for water drainage will be drilled (about 4mm in diameter, two holes at both ends for one pipe).The parts that cannot be drilled are not accepted.If the position of the hole is not specified, KOKEN will decide the position of the hole and drill it.
・Due to the characteristics of the anodizing process, the parts are cleaned by high-pressure washing after each process.When attaching the parts to the jig one by one, some small parts may come off in rare cases.Although we take great care in the handling and management of our products, we cannot be held responsible for any parts that become unrecoverable.
・In case of anodized aluminum defects, the warranty is limited to the cost of treatment of the defective product in principle.The warranty does not cover any other secondary liability.