Ignition Line Strengthening Harness Set with Bonding Cable. Since the input voltage is increased, the output voltage is also increased proportionally, so the spark voltage can be increased.
The stock vehicle harness uses a very thin harness. A thin harness returns from the battery to the ignition switch in the front part and distributes it to each part, so it is natural that the loss is considerable. In tuning the ignition system, this thin harness becomes a loss very much, and when the voltage and the current that came out of the battery reach the ignition coil entrance, the voltage drops considerably, and a great influence has come out to the spark voltage. This reinforced ignition line harness set is a harness set that can be connected at the shortest distance through the control unit from the battery terminal to the ignition coil entrance with thick wiring that has sufficient quality. This set is designed for vehicles that do not currently have an ignition line aring, to improve the efficiency of the reinforced harness set.
If your vehicle is equipped with ADVANCEPro arcing set, please choose the one without grounding. This product can be installed without any modification of the stock harness. The wiring, ignition coil, igniter, and other electrical systems become more and more efficient and resistive as the years go by, although a thin harness also becomes very lossy.
The efficiency of the vehicle decreases considerably after 4 years from the time of new. The ignition coil etc. can be exchanged in the meaning of refreshing, but the case to exchange the harness is few.
In the installation test, the ignition voltage was improved by about 2000V when the positive line was optimized by this product. The return side bonding can be improved by about 1000V. Recommending the installation of a bonding. (It may go up or down depending on the condition because it is a simple tester measurement.) You will be able to feel the torque and power when the total voltage changes to about 3000V.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Instruction Manual is easy to understand, but there was Wiring to take power from Battery to stabilize the voltage, and a bit of hardship. You can work if you remove Cover at feet you remove at Plug replacement and BOX under Seat. I expect that combustion efficiency will increase and fuel efficiency will be improved.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!