Paper Filtration Type Size: For both Φ6 and Φ8 (Small type) [Specification] Inner diameter of insertion part: Φ4.0 / Φ6.0 Outer diameter of insertion part: Φ6.0 / Φ8.0 Maximum outer diameter: Φ32.0 Full Length: 74.0mm Applicable hose inner diameter: Φ5.5 to 8.0
*When using the Φ8 insertion port of the Φ6/Φ8 common (14485/40863), be sure to cut off the Φ6 part with a cutter. *The maximum outer diameter is the outer diameter of the mating part of the body. *Overall length is the total length including the insertion part. *Compatible hose diameters are for reference only.
[Caution.] *It is time to replace the non-dissolving filter when it is clogged with dirt.If left unchanged, the flow path will be blocked by debris and the gasoline flow will be insufficient, so it is necessary to check it frequently.In addition, please consider the direction of installation to avoid such a situation. *Cannot be used with large diameter carburetors such as FCR.If used, a satisfactory amount of gasoline will not be supplied to the carburetor. *Resin products are not resistant to heat.Install the unit in a location where it will not be affected by heat from the engine.It may be deformed by heat. *The gasoline flow path is fixed for each product.Please check before installation. *Insert the hose and secure it with the band.If it is not secure, gasoline may leak and cause a fire or other serious accident.
Shutting out foreign substances such as dust and rust in the gasoline tank in advance is the first step to care for and prolong the life of the engine. Install a filter in the middle of the fuel hose from the gas tank. The transparent body allows you to check the dirtiness immediately. Measure the inside diameter of the hose and select the one that fits the dimensions of the filter insert. There are various sizes and shapes to choose from, taking into consideration the installation space.In addition, there are various filtration materials and methods, and it is necessary to consider the gasoline flow rate required for the bike.(Please be careful especially for big bikes and 2-stroke bikes)
The flow resistance is large because the filtration capacity is emphasized. Need to check the gas flow requirements of the motorcycle.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
[How is it used? I used it on my TZr250R. We do have rust removal on the Fuel Tank and of course the Cook has a Filter, but we use it as an insurance policy to prevent as much rust and Garbage from flowing away.
Was the one you received as per Image? If you have a vehicle with limited space, it's a good idea to check the installation position beforehand.
How was your experience with it? Hose inner diameter is φ8mm, so I cut off the tip part with Cutter and then installed it. I've only run the engine a little bit since installation, but so far the flow rate seems fine. I can't confirm the visible foreign body etc. at the moment, but it seems to catch it well.
[Points to note] If you just look at the Body, you'll want to put it on backwards, but the orientation is as shown in the picture. I don't think it's a problem because it's in the description, but you need to check the mounting direction.
How did it compare to other products? This is my first time installing a Filter, so I don't know about other products, but it's good that it can be used for both φ6 and φ8m, so it can be used in any car model.
【Review】 You don't have to measure every Hose inner diameter, but you can be sure to buy this product. It seems that only Gasoline flow rate may be a problem, so you need to be careful there.View Detail
When I use this filter on a Motard 115 with PE24, I don't get any air bites in the filter if I don't open it all the way, but if I pull it all the way, the gasoline supply can't keep up with the filter and it's completely useless. It is not suitable for the car that uses the fuel cock of the fuel hose of φ6, so it is necessary to pay attention.View Detail
The discharge rate is not low and I have no problems using it.
When I did the rust removal of the Tank, I was worried and the net of Strainer of Fuel Cock had been removed. I thought this was Redn and installed it.
It's troublesome when Jet is clogged with a short Rust.
I think it needs to be replaced periodically, so it's like seeing how dirty it is.View Detail
Smallish paper disposable fuel filter (Part number 96452) 。 For some reason, this one is more expensive than the Large Kisa one, which is easier to use than the Large Kisa one, so I feel the manufacturer's intentions.... It is installed between VT Normal engine and OEM cap
This type is to be discarded and replaced with a new one after a certain amount of use I used it in a reasonably good tank after the rust removal treatment and it stopped running after 16,000 km because it got clogged I did Not just rust, but Gasoline scum? The eyes seem to get clogged up with For your information
There is also a larger size type, but if the flow rate is higher than this, you can use the It's in the Instruction Manual, so you can install the Big carburetor, etc If you have concerns about fuel shortages, please be aware of them
Also, it has been functioning well by removing the fine rust that came out of the tank little by little It is Definitely recommended if you have an older vehicle and are worried about Tank rust View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!