Windshield Kit
Product # 09-11-0278
126,669.81 NGN (13,750 JPY)
List price: 132,427.53 NGN Save 4%
+138 Webike point (1,271.3 NGN)
This item is discontinued. |
Product # 09-11-0278
126,669.81 NGN (13,750 JPY)
List price: 132,427.53 NGN Save 4%
+138 Webike point (1,271.3 NGN)
This item is discontinued. |
Model Page Links
Fits: YAMAHA YB125 , YAMAHA SR400 , YAMAHA SEROW250 (B7C1/B7C4), SUZUKI GN125 , KAWASAKI Z125 PRO
I often go on long distance touring trips for about a week, so I bought this to keep the rain off.
I chose this one because it seems to have the largest area for MONKEY.
You can run up to your stomach without getting too wet. I am satisfied with the rain protection.
One Bolt was not long enough in one place and I thought it was defective, but it was replaced with a Bolt in another place.
It would be good to check once.
The only complaints are that, although it may depend on the angle at which the Helmet is mounted, the avoided wind is concentrated on the Helmet, causing neck fatigue, and the Wind Cutting noise has increased.
I also struggled a lot with too much flexibility in installation.
Bolts also loosen if not retightened from time to time.
Plating also rusted in six months.
Still, it is a good product for me to buy.View Detail
Fits: YAMAHA YB125 , YAMAHA SR400 , YAMAHA SEROW250 (B7C1/B7C4), SUZUKI GN125 , KAWASAKI Z125 PRO
Since the adjustment allowance is large due to the structure, the balance is taken and temporarily tightened while the quantity is being adjusted.:Set or else before/after/Quantity:Pair (for Left and Right) The top and bottom are not aligned.
I used Caliper, which happened to be handy, to determine the symmetrical dimensions.
The angle is to be seen. Now it is covered to the top of the Light and laid down.
I was disappointed as soon as I unpacked the brackets because there were textured and pitted parts, which I guess were caused by the plating process. I was disappointed as soon as I unpacked them. I pretended I did not see them and installed them as they were, but I feel that the fact that they were not rejected before shipment from the factory indicates the level of quality required.View Detail
Fits: YAMAHA YB125 , YAMAHA SR400 , YAMAHA SEROW250 (B7C1/B7C4), SUZUKI GN125 , KAWASAKI Z125 PRO
I tend to run my Motorcycle early in the morning.
Decided to install Screen because the driving wind is cold and tiring.
Company D and Company Z's Screen were mentioned as candidates, and
But Company D is too high mount.
The wind seems to blow in through the gap between Light and Screen.
Rejected.
(Also I didn't like the look of it until the end)
Z Corp is there for windproofing.
I liked the look of it, it looked like it would fit well on the CT125.
The Mount part cannot be Offset back and forth.
The mechanism seems to be designed so that it does not interfere with the front carrier.
The angle of the Screen must be changed to install the
Rejected.
Mukawa, who had not been on our radar at all, emerges.
The ScreenBody is made of a very thick acrylic material.
And it's not cheap enough to get scratched easily.
The clarity is excellent and there is no weird refraction that distorts your vision.
Mounting Hardware is a little rough to the genus Gold.
Plated and masculine finish, I like it a lot.
It was a little difficult to install.
The clamp part that attaches to the Handlebar and
The part of ROD that connects Screen and Clamp, and
It's made up of ScreenBody.
Anyway, it has a wide range of motion and can be adjusted steplessly.
I couldn't put out Center because it was too flexible.
(Mainly due to the fact that I'm a terrible shot.)
However, since the only tool used for installation is a hexagonal
It is stress-free without the hassle of changing hands.
As for the effect, it's cold and I can feel the wind.
When you stand up and when you sit down.
I think it is working well because the amount of air hitting my body is obviously different, I am satisfied.
And the egg-shaped round shape matches the CT125 well.
I love it, I'm going to use it in the summer without removing it.
Thank you very muchView Detail
Fits: YAMAHA YB125 , YAMAHA SR400 , YAMAHA SEROW250 (B7C1/B7C4), SUZUKI GN125 , KAWASAKI Z125 PRO
There are many types of Small Type Screen that can be tightened with Light Bracket, but there are few types of Handlebar Clamp Type.
The installation process is easy as you just clamp it to the Handlebar, although some minor alignment is required.
It is a little too large for the MONKEY125, and it becomes the feeling that it is too heavy, but the windproof effect seems to be there to a certain extent.
So far, I have not seen it installed on the MONKEY125, so it creates a rare atmosphere.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Please select option before add to your cart.
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.