Am I the only one that thought there would be also flange nuts included in this kit?Was a waste of money obviously.. Also for most Honda models 6x35 is more suitable..
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Am I the only one that thought there would be also flange nuts included in this kit?Was a waste of money obviously.. Also for most Honda models 6x35 is more suitable..
These feel great but were missing the nuts to hold the exhaust on. not a problem but would be nice if they were provided as showen in the picturesView Detail
Speaking of Stud bolt replacement, Double nut is difficult until you get the hang of it (or is it just me?).
This is nice and easy because you can go round and round with Hex.
I like that the price is not so high.View Detail
[How is it used?
When we replaced the Exhaust System, the length of the OEM Stud bolt was not enough.
Was the one you received as per Image?
As per Image
If I had to say, Plating is cheesy.
Was the installation difficult?
Just remove the OEM Stud bolt with a Double nut and install it. This bolt is EnamelScrew and has a hexagonal hole so you don't need to use Double nut to install it.
How was your experience with it?
Screw length has been increased so that Nut is hung firmly and it is safe.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
How to do double nut (https://www.google.co.jp/amp/s/www.webike.net/magazine/maintenance/maintenance-special_tools/59268%3famp=1)View Detail
[How is it used?
I chose this as my LITTLE CUB's Throwk Up companion.
Was the one you received as per Image?
Package is normal. The product itself is also Pad look clean.
Was the installation difficult?
How was your experience with it?
This was a problem.
I removed the original stud bolt and inserted it, but it was hard to turn.
If you are wondering why, the coating on this Stud bolt itself is interfering with the threads a bit.
Thanks to this, I had to re-cut the threads firmly beforehand, or straighten them with Nut, which is not important.
You could destroy the Engine if you didn't know you were busting it.
But other than that it's good. By the way, it's the same when I try it with a different Bolt or below the waist, so I don't believe it's a skill issue. I want to believe.
The thickness is also thicker than OEM and the cosmetics are not bad.
It was a bit advanced.
[Included Parts:were they on?
It has a Cap-like Bolt.
This one also eats up the screw thread problem, so you want to make sure you handle it properly.
[Was there anything that disappointed you?
Screw thread. Anyway, screw thread.
Although the price is higher, DAYTONA's Reinforced Stud is a more solid product.View Detail
[How is it used?
I installed it at the same time when I installed Monkey Type Z Full Kit 88cc Type S Cylinder (https://www.webike.net/sd/23872950/) of MINIMOTO.
The year of my CUB is unknown, the mileage is unknown due to the replacement of the meter, and there is nothing to believe, so I built in Refresh and insurance.
Was the one you received as per Image?
It was just like the image. But the matte surface treatment was unexpected.
Was the installation difficult?
If you can double nut, it's a piece of cake.
How was your experience with it?
I was able to buy peace of mind. I have no complaints or concerns.
[Included Parts:were they on?
Nut, this is Garbage. The accuracy is too bad. It tries to kill the Stud bolt that I put.
[Was there anything that disappointed you?
Nut。
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are thinking of installing a Reinforced Oil Pump, you should do this at the same time you remove the Stud bolt as it will make it easier to get the Drill in.View Detail
Recently I thought I refurbish that speedometer and I couldn't resist not putting that sticker in there I think it looks good..View Detail
Looks good, nice quality, good glue it wont fail with pressure washer.Everything yoshimura puts its name on it best quality!View Detail
Dual stack is double the power, bike feels a lot faster, sound has changed and 2 numbers bigger jet. It worths the money and it looks good I wish there was all the colors available..View Detail
Perfect for Chaly too a modification to the gas line and the throttle cable, also the intake was modded cut and welded to angle..View Detail
Fits: HONDA MONKEY , HONDA CHALY 50 , HONDA DAX , HONDA GORILLA
Locking paint not of good quality, also other bolts have a lot others too little..I was expecting a 12mm spanner screw. Didn't worth it.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING