Had these purchased for the aesthetic look on my 7 year old revo engine casing. Love the outlook of it. Every bolt fits accordingly to size and installation was a Breeze. It is Super light in weight as compared to the original bolts however I am not certain if the strength will be as tough as the original ones. Shall wait and see in time to come. Overall a good buy. Would definitely recommend to others.View Detail

The bolt had corroded over time, so I decided to replace it. The bolt is very lightweight, but because it is an aluminum bolt, the Torque specified for M6 is 5N, which is half that of an OEMB bolt. The Bolt is very lightweight, but the M6 specified Torque is 5N, which is half that of the OEMBOLT. It is recommended to apply the included Copper Grease. I think Torque wrench is necessary. I replaced it with a diagonal one to avoid distortion. However, the weight reduction is about half of OEM, I think. I haven't measured it, but it works as far as weight reduction is concerned. The number of pieces was perfect and the length was the same as OEM etc.View Detail

I bought it for Restore of 1998 formula Ducati MONSTER 400.
Engine's Generator cover, Bolt's head such as Crankcase is rusty, and the purpose is to exchange Bolt for better appearance.
Since Motorcycle is red color, I chose Red color Bolt.

【What made you decide the purchase?】
I also thought about arranging the required number of Bolts that match Size including OEM ProductBolt, but anyway the number and type of Bolt are many and the investigation is Large strange.
Purchasing this set was a deciding factor for purchasing that all necessary Bolt was complete.
Set so price is high (5 Quantity : 1 Set of 8pcs. ), But if you think about it per pc it's not too expensive.

【How was it actually used?】
In terms of strength, there are surfaces that you do not know until you use it for a long time. I am planning to conduct periodic retightening.

【Was it difficult to install? (Hard parts case)】
According to the attached Instruction Manual, the tightening Torque for M6 is specified as 5 Nm, and according to it, Torque wrench was used and installed. Galling preventive disulfide Molybdenum grease is attached, apply Grease to threads, then insert and tighten.
Basically it's an easy task, but Torque wrench is essential.
If the tightening Torque is insufficient, there is also the possibility of loosening during running, if you tighten with Overtorque, Bolt will stretch and you will not be able to secure axial force and will loosen or you will not be able to remove it.

【Please tell me the point of installation and hang (in the case of Hard parts)】
Anyway, remove Bolt 1 pc, clean the area near the hole, and repeat the installation. Do not pull Bolt at a time. Also, as I mentioned above, Torque wrench is mandatory.
Since it may be possible that the amount of attached Grease will run out, I think that it is better to prepare Anti-seeds Grease yourself.
Using the supplied Wrench, you can not manage the tightening Torque. It is hang to use neat tool.

【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]

[Is there anything I was disappointed about?]
OEMBolt (Chromoly, intensity class 8. 8) Manufacturer designation Torque is 9 Nm and 10 Nm. (Depends on location)
On the other hand, the specified Torque of this product is 5 Nm, so it will be tightened with a weak Torque. While saying high strength, it is better to understand that the strength is weaker than OEM's ChromolyBolt.

【Hope for Manufacturer - Please let me know if you have any improvement points]
It was saved because the necessary Size Bolt was complete.
In the attached Hexagonal Wrench, the original Bolt is not loose (Lick it)
And, in the attached Hexagonal Wrench, Torque can not be managed at installation.
Do not you have to dare to attach?

【Have you compared items?】
OEMBolt, Home center's Bolt, Stainless bolt, etc..
Bolt 1 pc 1 pc We examine Size and arrange the necessary number is Large strange, so it really helps if you are in Set.

[Others]
Attached photos, so please refer to it.




View Detail

We installed it in the 2015 year but only two places of Water Pump did not fit as long as 5 mm so we installed it by Cut.

The place where the Radiator solution comes out one place was not able to be installed because the Bolt tip was the one who took Taper.

I think that it is a good thing because it was customized on your own!View Detail

Since there was a point, purchase at Yahoo! Shopping 's Wa Big 2 shop.

For VIRAGO 250 set of 20 pcs. , The attached heat-resistant Grease is just right in feeling too much.
I think that it can be easily exchanged to anyone by changing the length by 1 pc each and exchanging.

Although it is a world of self-satisfaction to the last, it looks very good after replacement.
I think that Grease and Wrench are also attached to it is kindness and kind.

Gold It is never cheap so it was good that Bolt of Oil element cover was also included.

I chose Red this time but it was a product that was satisfactory also in terms of product without color unevenness and color fading.View Detail