Genuine Honda Crank Case Cover Gasket for GROM125

About quality and texture, I can confirm that the quality is great and that the material used is chrome steel.About the feeling of use, Just on of the radial ball bearings needed for the new engine that I am building from newly purchased parts from Honda. It has done its job supporting the transmissions countershaft within the right crankcase half.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the ones to purchase together to allow for the assembly of the transmission are the other three radial ball bearings.Difficulty of installation, I can say the fitment of the radial ball bearing for my installation was average due to already having access as the crankcase half is new and the process is explained in the service manual which requires the radial ball bearing to be pressed into the crankcase using specific tooling so not to damage the bearing.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda radial ball bearing that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is copper.About the feeling of use, One copper sealing washer was needed for the new engine that I am building from newly purchased part from Honda. It has done its job in sealing between the crankcase and the flange bolt for the tensioner oiler port.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the most important to go with the copper sealing washer is the 6x18mm flange bolt as they all work together on the installation.Difficulty of installation, I can say the fitment of the copper sealing washer for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda copper sealing washer that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

This was a part that was needed for the CBR1000R that came in. This was in need of a new o-ring for the right side crank case cover that was also being changed. It just makes sense to change the o-ring too as the old one was not great. I did not know the history of this bike and with checking the old o-ring, it certainly needed a new one. I found the right o-ring by using the tools Webike provide on their help section and then cross referencing with Honda schematics for my own peace of mind. I did have a couple of other parts I needed to order so I just got them all at the same time. My preferred courier is EMS as they just get the orders to me fast and efficiently. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. This o-ring was inside the standard Honda packet and was in perfect condition. The quality is brilliant. It is a nicely made o-ring and there were no extra bits of rubber attached like you get with some after market brands. I double checked the diameter and it was exactly as it should be. I wipe a little oil on the o-ring in this section as it helps to stop from pinching or breaking the new o-ring upon install. Once fitted, there is a nice tight seal with zero leaks, even after a steady warm up. Great purchase, very happy customer. Thank you Webike. View Detail

Another Quality Honda part that has been use to bring another honda motorcycle back to life. This part was crictial to maintaining the quality that honda produced fromt the factoryView Detail

Another Quality Honda part that has been use to bring another honda motorcycle back to life. This part was crictial to maintaining the quality that honda produced fromt the factoryView Detail

There were a couple of other parts that I wanted to get for my wife's Ninja 650 which will help protect the bike if there is any accident and double as stand hooks. These are what I decided to get and the added bonus is that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant. I found the correct part numbers by checking Evotech website and adding the model of bike. Very pleased to see that Webike also stock them, so purchased them from here instead. The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The shipping method I chose this time was EMS fast service. It was a very good price as I also had a few other parts in my basket and this cut the shipping down than just buying one or two parts. Everything arrived with me in 7 days. The outer box was sealed and the little bit of empty space inside the box was filled with bubble wrap. All my parts, even the smaller ones arrived in perfect condition. The stand hooks came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The stand hooks themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other stand hooks so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View Detail

After a lot of hard riding on this off roader, the rear brake pedal was too bent to bring back to how it should be. The only good alternative is really to buy a new one. Not too big a deal, it's just a pain to be off the road for an extended period waiting for this to arrive. I tried to get one locally but there were no dealers with stock and buy the time they could get stock in, I could get one delivered from Webike. Finding the right pedal for this year and model was easy enough by checking Honda schematics. Webike did have a sale on some of the Honda parts and I got this for a few pounds cheaper than I would've done anyway. I like this a lot. With some other parts that needed to be ordered too, I got them al shipped using EMS. My order arrived in 7 days and all the parts were expertly packaged. The brake pedal was inside the Honda packaging and was also padded out in the box with air pockets. The brake pedal is a really well made piece of kit and the material used looks to be improved slightly as it seems thicker and sturdier than the one we removed. Great stuff. The quality is brilliant and hopefully, this will take as good a beating as the old one. The fitting is a little tricky but if you take your time, you're good to go. All fitted in an hour or so with all the extra parts I needed to add back. Very happy with this purchase, thank you Webike. See you soon. View Detail

A few new parts were needed for this R1 after problems with the rear wheel. Not really sure how, but the rear wheel was totally missing the spacer. I can only assume this was due to not being replaced after bearing change. Obviously, this is a bad idea not to have one as it holds the swingarm in the place that it should be in. The price from Webike was really good value. I had this and a few smaller parts shipped using EMS and the entire order arrived in 7 days. The spacer was inside the standard Yamaha plastic packaging but was inside a bubble wrap envelope that Webike warehouse made. No damage was found and everything was ready to fit. The spacer itself is a precise spacer that is very well machined. The ends were all smoothed off with no sharp parts. Excellent quality from Yamaha as always. I added a little copper grease which helped the spacer seat correctly and then replaced with new bearings to complete the job. Now I am confident that the rear wheel will have no issues and the swingarm will tighten as it should with no ill effects. Great work guys, thanks a lot. View Detail

Another key that needed replacing due to wear and tear. No point getting aftermarket when you can buy the genuine Kawasaki one at this price. The part number was not particularly hard to find and Webike had these available. Total win. The price was very reasonable and better than could have sourced locally so I just added 2 to the basket to keep as a spare as you just never know when one might come in handy. There were a few other parts in my order and all were shipped with EMS and arrived in 5 days. All my parts were received in perfect condition. The key even came in a small Kawasaki bag which was a nice to see. The key has a really good and solid feel to it. Although it is a blank, the edges are smooth as you would expect. I got the key cut and installed my new/old lock set. All works perfectly and now I can get my seat off. Thank you Webike, great job. View Detail

As with when ever I change out torsion springs regardless of which bike, if the circlip is also available, I do tend to change these out too. No point putting a previously removed circlip on a new build. Yes, it might look ok but the tension is never going to be what it actually should be. So, finding the right circlip was as straight forward as finding the bearing. Using the tools Webike provide on their help pages and cross referencing for my own peace of mind on Yamaha schematics and the MT03 2021 page. The price was excellent as expected. With some other parts for this bike in my basket already, I had them all shipped together to save a little shipping fees. EMS is my courier of choice as they just get the orders delivered fast with no fuss. Upon arrival, the box was well packaged and all the smaller parts were individually packed for safety. The circlip came in the standard Yamaha packet. Not really much I can say about this circlip, it is well machined, the parameters are within spec. The quality is plain to see but until you attempt top put it in place, you are never going to know how it fits. With no issues on the install, I can say, this is a top quality part from Yamaha and that was the finish of the shift shaft rebuild. Very pleased with the out come, the engine sounds healthy once again. Thanks Webike. View Detail