11,642.19 NGN
(1,242 JPY)
10,629.82 NGN
(1,134 JPY)
(9% OFF)
5 (1 Reviews)
Fits:
KAWASAKI Z1000R , KAWASAKI Z1100 GPZ , KAWASAKI Z1100GP , KAWASAKI Z1100R , KAWASAKI Z2 (750RS)
View more
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
For Sprocket diversionIt was used to divert the Sprocket of the Z system to Kawasaki's Zr-7S.
As you may know, the shape of the sprocket nut on Zr-7S, ZEPHYR750, ZEPHYRχ and other relatively recent vehicles is different from that of the old Z series.
The Sprocket nut on the Zr-7S has a two-stage outside diameter, but the Sprocket nut on the old Z-series cars is just a Nut.
Incidentally, on newer vehicles such as the ZZr1400, the speed sensor is often taken from the front sprocket rather than from the meter gear on the front wheel, and the outside of the sprocket is square on top of the two-stage structure.
I believe it was M20 or M18 (I did not measure it).
So why did I need this Sprocket nut……
This is because the Sprocket nut in NORMAL did not allow the use of a turning Washer.
As a result of diverting the Sprocket, the Zr-7SNORMAL anti-turn washer could not be used, and the anti-turn washer also had to be diverted from the old Z-series washer.
Then, the outer diameter of the NORMAL Sprocket nut was too large, and the washer could not be broken off.
After researching, I found out the difference between Sprocket nut, as I wrote earlier, so I decided to purchase it.
The result was a Large success.
The same Screw diameter and Pitch of the Counter Shaft could be installed in the correct way.
Parts installed together
・Sprocket
Brand:SUNSTAR SUNSTAR
Product name:8mmOffset sprocket
Part Number:3C6-17
Non-rotating Washer
Brand:DOREMI COLLECTION DOREMI COLLECTION
Product name:F Sprocket Washer
Part Number:10483
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING