Since the engine tuning of the CUB was done, it was purchased and installed to increase the heat value of the Plug.
There are various expensive plugs such as RACING and Windshield IRIDIUM, but I have no complaints with Standard Plug BP5HA.
It's a nice point to try out various settings, and the Gold amount that you can buy many of them.
Fits: HONDA CB125T 81-, HONDA CRF100F 03-, HONDA CRF80F 07-, HONDA SCV100 Lead 03-, HONDA TRX70 85-
NGK Standard Plug CR7HSA is a beginner plug and is a much cooler burning plug with it limitations if you use dio motors This NGK B8HS can be used from a 50cc to a stroker 130cc and is an all around plug for any 2stroke dio motor if your running a stock Dio/Af16,18...DD50 j/dash you dio guys know witch dio is compatible,the CR7HSA,B7HS,B8HS is the 3 most common spark plug herd in hawaii now sometimes i use the B7HS on my deeper low compression heads because it sticks out a little more try and oder 3 of these plugs from this site ans use it is your stock dio motor youll feel the differencesView Detail
Fits: HONDA CB125T 81-, HONDA CRF100F 03-, HONDA CRF80F 07-, HONDA SCV100 Lead 03-, HONDA TRX70 85-
[How is it used?
The XR100R we received was immobile, so we first replaced the Plug for initial maintenance.
It is safer to replace the Plug that was on, as we do not know when it was replaced.
It is also reasonably priced.
How was your experience with it?
I think it is better to replace the plug when the engine is not running well. I will change the number of the Plug depending on the situation.
How did it compare to other products?
I don't know because I only use NGK.
I would like to use otherManufacturers when I have a chance.
[Points to note]
Be careful when tightening the new Plug; Torque management should be done well to avoid damaging the Screw threads.
Other items that would be helpful
Torque wrench would be nice to have.
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing specialView Detail
Fits: HONDA CB125T 81-, HONDA CRF100F 03-, HONDA CRF80F 07-, HONDA SCV100 Lead 03-, HONDA TRX70 85-
[How is it used?
Usually Iridium plugs are used to produce basic setting when carburetor, Exhaust System, Bore up, etc. are custom made.
We purchased this Plug, which has one of the highest heat values, to use as a standard.
Was the one you received as per Image?
It is the usual Plug, so it is as per Image.
Was the installation difficult?
It is easy to replace with Plug wrench.
However, Torque wrench is recommendation because the Washer will be crushed if it is removed and used many times.
How was your experience with it?
One Up in the heat value of the Plug does not change the Large width, but it is like an insurance policy in case of an emergency, considering the heat of the Engine.
Also, I don't think a heat value of 7 is necessary unless it is a Tuning engine.
[Included Parts:were they on?
Nothing else special.
[Was there anything that disappointed you?
Not particularly
Compared to Iridium plugs, the electrodes can be revived by rubbing with Brush when they are covered, so even a little rough handling is not a problem.
▼If you have a Plug with different heat value as Stock, you can adjust it according to the temperature and Tuning, so you can recommend it.View Detail
Fits: HONDA CB125T 81-, HONDA CRF100F 03-, HONDA CRF80F 07-, HONDA SCV100 Lead 03-, HONDA TRX70 85-
I buy this as a consumable for my APE100, which I ride to work every day.
I have been replacing them every 5,000?yen or so, but the cost performance is very good, and I am riding comfortably using the new ones more and more. The cost performance is very good, and I am riding more and more comfortably with the new ones.View Detail
Fits: HONDA CB125T 81-, HONDA CRF100F 03-, HONDA CRF80F 07-, HONDA SCV100 Lead 03-, HONDA TRX70 85-
The engine runs much better now, and although you need a plug wrench to do it, it is very easy to replace and you can see the difference.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING