This Partz is a favorite. I think there are some who don't need them. As a product, as expected of SP Takekawa, it is a perfect workmanship. Although a special tool is required, anyone can install it by following the instruction manual.:You only need to purchase the Special Tool as a set.
The thing that bothers me the most is the Clutch meet point, I think it was pretty far away when it was on Wire, but the hydraulic system is closer to the opposite (around half of the operating range). The reason it feels so close is because the front was so far away?
The rest of the time, a brand new Air out of MASTER and Release! New ones take longer! (Maybe it's just me.)
Fits: HONDA glom (JC61-1000001-1299999) GROM(JC61-1300001-) GROM(JC75-1000001-) MSX125(MLHJC618_D5000001-) MSX125SF, HONDA GROM (JC61-1000001-1299999) GROM(JC61-1300001-) GROM(JC75-1000001-) MSX125(MLHJC618_D5000001-) MSX125SF
The Motorcycle Clutch has a Wire style. When Hydraulic. There is a
GROM is Wire style. The Clutch is opened and closed by pushing and pulling the wire, and the Clutch system is simple and light, and the place where the wire type is stable without costing is a good point of the wire type, but why did I change to the hydraulic Clutch! I think I've made an impression this time.
What made you decide to buy?
The most decisive factor is that the response of the Clutch operation is improved by adopting hydraulic clutch release system and the operability is improved.
It is possible to install the Thermostat Unit and prevent overcooling when the Oil cooler is installed.
In order to carry out the customization planned for 2020 as planned, and to reach the final customization of what we have prepared so far, we need to make sure that we are able to achieve our goal.
How was your experience with it?
However, the oil pressure type allows us to install it as we want.
Clutch operation is more direct and easier to handle than wire type.
・Special Clutch Cover Kit [Hydraulic] The Slipper clutch kit is also compatible with the company's Slipper clutch kit, and I was able to experience the Slippers function even more than with the wire type.
・Special Clutch Cover Kit [Hydraulic] [Wire style] Although the burden on the crankshaft is reduced by Oil through Nut, the amount of reduced torque is also reduced. However, the response is improved by the reduction, and the extension of high revolution when the High Camshaft is installed, I think that you will be able to experience the engine response that you cannot taste before the exchange. (There is a difference in the experience between individuals)
・Special Clutch Cover Kit [Hydraulic] can be used with OEMEngine. OthersOption allows for version up! It is compatible with the high tuned engine. The exterior of the car is simple, but is finished with an exterior that asserts its existence.
Installation...
Special tool to fix the OEM centrifugal oil filter is required (Honda OEM:Lock Nut Wrench - GEARHolder or Takekawa:Lock Nut Wrench - Universal holder) to be applied to othersRelease piston ORing Working with RubberGrease Kill!!!! It is.
[This Arrangement]
The Special Clutch Cover Kit includes Takekawa:Clutch master slinder. 12.7mm Piston diameter. (Later version of the kit can be equipped with the Aluminum Billet Lever [Foldable] You can also change to This time, instead of using the Takekawa:Clutch master slinder which was enclosed, Nisshin:Clutch master [Horizontally Type] I changed the piston diameter to 14mm. Why is it costing Nisshin:Clutch master [Horizontally Type] You've made it! I wanted to use my favorite U-KANAYAAluminum Billet Lever with Nisshin:Clutch master. is sold by U-KANAYA "for Repair Installation Attachment By using the U-KANAYAAluminum Billet Lever, you can easily use the U-KANAYAAluminum Billet Lever that you are used to using as before without having to replace it.
[Point of Setup]
Nisshin:Clutch master [Horizontally Type] I did not use the Banjo straight but ordered the Adapter10? made by Takekawa separately and connected it to the Clutch master. The Adapter10?HoseFitting should be tightened by the torque wrench with the torque wrench with the specified torque. Anodized is also weak, or maybe Anodized has peeled off a little (tears), so it is a thing to be careful in handling.
[Was the Instruction Manual easy to understand?
Special Clutch Cover Kit Instruction Manual by Takekawa, specializing in 4MINI is written in detail and is easy to understand. The Special Clutch Cover Kit is the first time I customized the GROMEngine section. [Wire style] In the beginning, I was very anxious to do it well. At first, I was not sure if I could do it well, but thanks to the easy to understand Takekawa Instruction Manual, I was able to do it safely. However, I was able to do the job successfully thanks to the easy-to-follow Takekawa Instruction Manual. Now, the Takekawa and KITACO Instruction Manual is my reference book. I am now using both companies' Instruction Manual for reference.
[Others]
Special Clutch Cover Kit [Hydraulic] And Nisshin:Clutch master [Horizontally Type] I do not know the affinity with... I do not know because I do not use the attached Clutch master (Piston diameter 12.7?), but Nisshin:Operation of the Clutch master feels a little heavy. Special Clutch Cover Kit which was used before that [Wire style] Maybe that's how I felt about it, because it was a rack and pinion type that could be operated lightly and smoothly.
Nisshin:The Clutch operation when the U-KANAYAAluminum Billet Lever is combined with the Clutch master, the U-KANAYAAluminum Billet Lever Adjuster has 6 steps. It can be adjusted with the Adjuster. By adjusting this adjuster position, the position of the clutch lever can be changed. Conversely, at the 6th position, the Clutch lever is farther away from the Grip, so the connection position also becomes farther away. As a result, the position of the Clutch lever will change by Adjuster operation and the Clutch connection position will also change! It becomes. Incidentally, the size of my hand is about 19cm from the tip of my middle finger to my wrist. When I ride in the city with a lot of Clutch, I use the first one (which is 4-5cm away from the Grip) to reduce the load on my hand. [I'm posting the picture for your reference, but I couldn't get a good shot]
Special Clutch Cover Kit [Hydraulic] There are many things that I was not able to tell you about in Impression. What I could not tell you about will be posted in the diary soon. If you are interested, please take a peek.
[Muttering]
I'd like to tally up this year's receipts, invested in GROM at the end of December 2020, and end the 2020 Custom. There are only 20 days left in the year, and although it was a strange year for us at Corona and Large, we had a great time with GROM. The first custom of 2021 will be 00 00. "Ideal GROM We're finally in the final stages of customization.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING