46,338.12 NGN
(5,030 JPY)
42,653.18 NGN
(4,630 JPY)
(8% OFF)
4 (3 Reviews)
Average
Beware of SAPivot bearing specs. which are thicker than OEM shaftsIn conclusion, the Pivot shafts (made by OVER) in the external Swing Arm
and the rear axle shaft did not work
I don't know if it's an individual difference, but the NNShaftQuantity I received on my end:I measured 2pc with a handheld Caliper
There was 12mm at ShaftCenter
The MORIWAKIEngineerRing that was inspected during the return process had the same opinion
The OEM Axle and Pivot shafts are the same
[OEM Product No. 42301-K26-900]
The inner diameter of the new OEM RearAxleBearing is 12mm JUST
I had to beat it because Clearance is zero or strong
The Bearing was damaged during several insertions and removals
It's not a rotating shaft under normal use, so I don't think it's going to wear out
The OEMAxle Shaft diameter at 4000km was 11, 90-92mm
KOOD (made by Kowa) is nearly 12mm long, but it is thinner than MORIWAKI's
Like the OEM Shaft, they can be attached and detached by hand only
We talked directly to a person from MORIWAKI product development department during the process of Objection support the..
NNShaft is only available on OEM pivot shafts (12mm and larger in diameter)
It seems to have been designed to be used for
We can remove the footpegs from any side is the Concept
The pivot bearing part of Axle Shaft and Other Brand Product It is not expected and not applicable to use for 12mmJUST (both 12mmJUST) by the Manufacturer ]
I just wanted to ask Ue-Big to include this one sentence in a postscript
Except for granting a 10% return guarantee point
I am very disappointed that you have not taken any action externally
Part of me is to blame for putting it on without any doubt that it would go in
It's just a bad aftertaste for breaking a motorcycle somewhere to improve
I'm posting this for the benefit of other Users so that they don't have to go through the same thing I did
Please be careful
We had several names, one after the other
We-Big Customer Service
Let's just do our jobs a little better
Reviews For MORIWAKI NN Shaft From Other Webike User
Very Good
Well than NORMALQuantity:Pair (for Left and Right) The footpegs can be attached and detached from both sides, so I wore it The length is 320? The part which the screw does not cut is 272? It is long It feels heavy to hold and is well made Accuracy is good and it went into the pivot easilyView Detail
Very Good
It goes in easilyI installed it in conjunction with the Swing Arm replacement
Both SidesLock nut I was worried about whether or not it would be used together, but I was able to install it without any difficulty The footpeg replacement becomes considerably easy
The downside is that it's Uniqlo's Material, like the OEM, and it will rust at a later date I think it's a bit expensive for Uniqlo (Accuracy is pretty good.)View Detail
Most Viewed Reviews Of MORIWAKI Pivot Shaft
Very Good
Well than NORMALQuantity:Pair (for Left and Right) The footpegs can be attached and detached from both sides, so I wore it The length is 320? The part which the screw does not cut is 272? It is long It feels heavy to hold and is well made Accuracy is good and it went into the pivot easilyView Detail
Very Good
It goes in easilyI installed it in conjunction with the Swing Arm replacement
Both SidesLock nut I was worried about whether or not it would be used together, but I was able to install it without any difficulty The footpeg replacement becomes considerably easy
The downside is that it's Uniqlo's Material, like the OEM, and it will rust at a later date I think it's a bit expensive for Uniqlo (Accuracy is pretty good.)View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING