930.45~ NGN
(101 JPY)
4 (13 Reviews)
Excellent
preventive measureUsed in 2018 PCX KF30
In the past, Screw licked this part due to sticking, and I had a bad experience with it, so I replaced it
It's also black in color and unobtrusive
Reviews For K-CON Master Cylinder Cap Screw From Other Webike User
Excellent
good screwI need this screw for my motorbike installing of the accessary. It is size suitable and good condition. I like it very much.View Detail
Very Good
Easy to useThe screws on the Reserve tankCap of the Master Cylinder are quite painful, so it is good to be able to replace them to keep them clean and lick-free.
It is cheaper than OEM and the quality is better.View Detail
Very Good
cheap[How is it used?
The pure Normal Thread Screw on the D-Tra 125 has rusted out and was replaced.
Was the installation difficult?
Be careful not to nudge the screw head when removing or attaching the screw.
Check if the size of Phillips Screwdriver is correct.
How was your experience with it?
The area around the handlebar is the most visible part of the car when driving, so after replacing it, I feel good that the rust is gone from my view.View Detail
Excellent
KITACOConvenienceParts has always been a great help to us. w[How is it used?
I went to open the lid to check the Master Cylinder for the first time in a while, but one of the Screws was stuck and would not turn! At first I tried using Phillips Screwdriver, but it started to lick, so I tried Impact Driver, but it still couldn't turn, and eventually it was completely licked (I cried). After searing the screw and tapping the GunGun with the Impact Driver, I managed to loosen it and remove it! I don't want to go through this trouble again, so I decided to introduce K-CON's Stainless screw.
Was the one you received as per Image?
Black looks the same as OEM Screw, but Material:It should be Stainless Steel w
Was the installation difficult?
If the OEM screws are not sticking, simply swap them in.
How was your experience with it?
The appearance is OEM itself.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:If the OEM screws are hard to disengage, try using the Impact Driver from early on wView Detail
Very Good
Reasonable from OEM.The screw of Reserve tankCap of Master Cylinder always becomes rusty and hard only when loosening it, and the head becomes easy to lick. It seems to be good to replace it after removing it once, but I recommend KITACO product because it is cheaper and better quality than OEM.View Detail
Most Viewed Reviews Of K-CON Other Brake Master Cylinder Options / Repair Parts
Excellent
good screwI need this screw for my motorbike installing of the accessary. It is size suitable and good condition. I like it very much.View Detail
Very Good
Easy to useThe screws on the Reserve tankCap of the Master Cylinder are quite painful, so it is good to be able to replace them to keep them clean and lick-free.
It is cheaper than OEM and the quality is better.View Detail
Very Good
cheap[How is it used?
The pure Normal Thread Screw on the D-Tra 125 has rusted out and was replaced.
Was the installation difficult?
Be careful not to nudge the screw head when removing or attaching the screw.
Check if the size of Phillips Screwdriver is correct.
How was your experience with it?
The area around the handlebar is the most visible part of the car when driving, so after replacing it, I feel good that the rust is gone from my view.View Detail
Excellent
KITACOConvenienceParts has always been a great help to us. w[How is it used?
I went to open the lid to check the Master Cylinder for the first time in a while, but one of the Screws was stuck and would not turn! At first I tried using Phillips Screwdriver, but it started to lick, so I tried Impact Driver, but it still couldn't turn, and eventually it was completely licked (I cried). After searing the screw and tapping the GunGun with the Impact Driver, I managed to loosen it and remove it! I don't want to go through this trouble again, so I decided to introduce K-CON's Stainless screw.
Was the one you received as per Image?
Black looks the same as OEM Screw, but Material:It should be Stainless Steel w
Was the installation difficult?
If the OEM screws are not sticking, simply swap them in.
How was your experience with it?
The appearance is OEM itself.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:If the OEM screws are hard to disengage, try using the Impact Driver from early on wView Detail
Very Good
Reasonable from OEM.The screw of Reserve tankCap of Master Cylinder always becomes rusty and hard only when loosening it, and the head becomes easy to lick. It seems to be good to replace it after removing it once, but I recommend KITACO product because it is cheaper and better quality than OEM.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING