27,637.05 NGN
(3,000 JPY)
19,041.93 NGN
(2,067 JPY)
(31% OFF)
5 (14 Reviews)
Excellent
Because I was injured in my handI had an accident, injured my fingertip, had a bandage, and purchased urgently because I can not install Gloves. (Although Gloves has to be done even with Handlebar Cover attached, once in a matter of emergency) Because it can not get wet with rain Waterproof nature has also become a criterion for selection. Actually, it did not get wet even on rainy days.
I do not have worry about the clearance and it seems to be reliable even during cold weather.
Reviews For Osaka Fiber Waterproof and Cold Weather Neoprene Handlebar Cover From Other Webike User
Very Good
Essential Items for WinterIn winter, no matter what kind of gloves you use, your fingers will get cold and it will be hard to hold a grip in a few minutes.
It would be better if you put on electric heaters or grip heaters, but they cost a lot of money and are a pain in the ass.
The Handlebar Cover is primitive, but it is very effective in preventing the wind from hitting it. It may be a bit cumbersome to install because it requires removing the mirror, but it is a good item to have.View Detail
Excellent
This is a must have for Winter Riding. You'll get used to the dorkiness!I commute 40km to work and back and ride my Motorcycle everyday. That's over 10,000km a year just commuting.
Even in the suburbs of Tokyo, winter mornings can get as cold as 0°C. A Handlebar Cover is a winter necessity.
I think my Handlebar Cover history is about 15 years.
The Handlebar Cover I used was a Quantity:It's about 5pcs. eyes, so it's an imprecation from my experience so far.
Komine (the transparent window at the thumb deteriorates. The sunburn from the ultraviolet rays is terrible, and it becomes a disappointment in three years)
Yamamalt (for CUB only. The boa lining is warm, but doesn't dry out when it gets wet; it was solidly built for BUSINESS, but became stiff after 3 years)
Yamamalt (Quantity):2pc. (I did Repeat, but I switched Motorcycles after 1Season)
Large阪繊維材料 1pc. eyes (from BHC-01Vinyl leather. I like it very much, but it is out of stock, so Switch to another Material)
LargeHan Textile MaterialQuantity:2pc. Set eyes←this time
I really wanted to buy the ones made of Vinyl leather instead of Neoprene, but they were out of stock….
I liked the construction so much that I decided to go with the Neoprene version from the same manufacturer.
The previous Komine Handlebar Cover of the same material was badly tanned, so I'm prepared for this one to be the same.
It's a cheap one, so if it fades in 2-3 years, I guess it's disposable.
Let me preface this by saying that I am impressed with this product.
The entrance is not too narrow, so it is easy to insert and remove!
The price is cheap.
The outer dimensions are more compact.
Make a hole of about 15mm diameter at the position of the Bar End and insert the Bar end cap from the outside of the Cover to increase stability.
Using with Grip heater is really Recommendation!COTA ツ.
The blinker control part is made of soft material and gentle. (The coating on the surface will deteriorate in a year.)
There is no transparent window in the operation part. It is good that there is no transparent window. (Vinyl windows are hard and breakable, and I don't see them anyway, so they're useless)
When parking your bike on a rainy day, the angle of the Cover will help reduce flooding. It is inevitable that there will be some flooding.
Before a heavy rain or snowfall, you can avoid flooding by covering it with a Convenience bag. I almost never do it because it's too much trouble.
Summary:.
The cold in my hands is unbearable.
I can get used to being lame. Come on, you too!View Detail
Excellent
Once you put it on, you can't stop.I always install this on my commuter Scooter every winter.
I sometimes wonder if I should rely on modern civilization and buy a Grip heater or electric heating gloves, but this Cover is enough for the winter in Tokyo.
The construction is simple, so it is easy to put on and take off, and can be removed quickly when not needed or when wet with rain.
This is a great product for the price.View Detail
Excellent
My first Handlebar CoverThis is the first Handlebar Cover I have bought in my long history of motorcycling.
It's so comfortable and amazing, I feel like I can use my bare hands without getting cold because the wind doesn't get into my hands.
The Handlebar Cover itself doesn't look great, but I thought it would be a great choice for riding a motorcycle in the winter.View Detail
Excellent
Handlebar Cover in the middle of winter and this Cover at the traffic lightThere are Heater Grips, Electric Gloves, etc., but my personal experience is that they are completely unnecessary if you have a Handlebar Cover.
This is because the wind will cause the heat in your hands to dissipate and your fingertips to freeze.
I think many people avoid the Handlebar Cover because of its appearance, but once it's on, you won't feel uncomfortable at all.
There are many types of Handlebar Covers from other manufacturers, but most of them have a narrow wrist opening. When you let go of the Handlebar at a traffic light and put your hand back into the Handlebar, it gets in the way. Especially, the Glove with Protection becomes a hindrance, and it is not possible to access the Handlebar immediately. For this reason, when waiting at a traffic light, it is necessary to return your hand to the Handlebar as soon as possible.
In this regard, this Handlebar Cover has a wide wrist opening and is not obtrusive.
On the other hand, it is not cold at all when I say that it is cold even if the wrist mouth is open.
I use this one on my Large type Motorcycle, although I have used others from other manufacturers.View Detail
Most Viewed Reviews Of Osaka Fiber Handle Covers
Excellent
Good gloves!It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too.View Detail
Very Good
Essential Items for WinterIn winter, no matter what kind of gloves you use, your fingers will get cold and it will be hard to hold a grip in a few minutes.
It would be better if you put on electric heaters or grip heaters, but they cost a lot of money and are a pain in the ass.
The Handlebar Cover is primitive, but it is very effective in preventing the wind from hitting it. It may be a bit cumbersome to install because it requires removing the mirror, but it is a good item to have.View Detail
Excellent
This is a must have for Winter Riding. You'll get used to the dorkiness!I commute 40km to work and back and ride my Motorcycle everyday. That's over 10,000km a year just commuting.
Even in the suburbs of Tokyo, winter mornings can get as cold as 0°C. A Handlebar Cover is a winter necessity.
I think my Handlebar Cover history is about 15 years.
The Handlebar Cover I used was a Quantity:It's about 5pcs. eyes, so it's an imprecation from my experience so far.
Komine (the transparent window at the thumb deteriorates. The sunburn from the ultraviolet rays is terrible, and it becomes a disappointment in three years)
Yamamalt (for CUB only. The boa lining is warm, but doesn't dry out when it gets wet; it was solidly built for BUSINESS, but became stiff after 3 years)
Yamamalt (Quantity):2pc. (I did Repeat, but I switched Motorcycles after 1Season)
Large阪繊維材料 1pc. eyes (from BHC-01Vinyl leather. I like it very much, but it is out of stock, so Switch to another Material)
LargeHan Textile MaterialQuantity:2pc. Set eyes←this time
I really wanted to buy the ones made of Vinyl leather instead of Neoprene, but they were out of stock….
I liked the construction so much that I decided to go with the Neoprene version from the same manufacturer.
The previous Komine Handlebar Cover of the same material was badly tanned, so I'm prepared for this one to be the same.
It's a cheap one, so if it fades in 2-3 years, I guess it's disposable.
Let me preface this by saying that I am impressed with this product.
The entrance is not too narrow, so it is easy to insert and remove!
The price is cheap.
The outer dimensions are more compact.
Make a hole of about 15mm diameter at the position of the Bar End and insert the Bar end cap from the outside of the Cover to increase stability.
Using with Grip heater is really Recommendation!COTA ツ.
The blinker control part is made of soft material and gentle. (The coating on the surface will deteriorate in a year.)
There is no transparent window in the operation part. It is good that there is no transparent window. (Vinyl windows are hard and breakable, and I don't see them anyway, so they're useless)
When parking your bike on a rainy day, the angle of the Cover will help reduce flooding. It is inevitable that there will be some flooding.
Before a heavy rain or snowfall, you can avoid flooding by covering it with a Convenience bag. I almost never do it because it's too much trouble.
Summary:.
The cold in my hands is unbearable.
I can get used to being lame. Come on, you too!View Detail
Excellent
Once you put it on, you can't stop.I always install this on my commuter Scooter every winter.
I sometimes wonder if I should rely on modern civilization and buy a Grip heater or electric heating gloves, but this Cover is enough for the winter in Tokyo.
The construction is simple, so it is easy to put on and take off, and can be removed quickly when not needed or when wet with rain.
This is a great product for the price.View Detail
Excellent
My first Handlebar CoverThis is the first Handlebar Cover I have bought in my long history of motorcycling.
It's so comfortable and amazing, I feel like I can use my bare hands without getting cold because the wind doesn't get into my hands.
The Handlebar Cover itself doesn't look great, but I thought it would be a great choice for riding a motorcycle in the winter.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING